If you have an open-face helmet and want to enjoy hands-free calls, music streaming, and GPS navigation while on the road, a Bluetooth headset for open face helmet is what you need. It is a wireless communication system made specifically for open-face helmets, usually equipped with boom microphones for better voice pickup in open-air conditions.
In this post, we will discuss:
- What Bluetooth headset is suitable for your open-face helmet?
- What other factors should be considered when choosing an open face helmet headset?
- How do you install a Bluetooth headset in an open-face helmet?
How to tell if a Bluetooth headset is suitable for an open face helmet?
Look for a low-profile mount (clamp or adhesive) that fits the helmet shell, slim speakers that sit comfortably around the ears without pressure, and a flexible boom mic that can reach close to your mouth for clear calls.
Check microphone type: Boom mic is needed for use with open-face helmet
A Bluetooth helmet headset typically includes two types of microphones:
🎤 Boom microphone: A boom mic is the best choice for open-face helmets because it features a flexible arm that can be positioned close to your mouth. This helps capture your voice clearly, even without a chin bar to block wind or support the microphone. It is ideal for phone calls, voice commands, and intercom conversations while riding.
🎤 Button / wired microphone: These microphones are mainly designed for full-face helmets, because they can be mounted inside the chin section of the helmets. The microphone usually is not close enough to your mouth, which can reduce voice clarity and make communication harder at higher speeds.
💡 Quick tip: If the headset package includes a boom microphone, it is generally a strong sign that the device is a motorcycle Bluetooth headset for open face helmet.
For example, all Moman Bluetooth helmet headsets are compatible with open face helmets and full face helmets because they come with a boom mic and a soft mic.
Look at the mounting style: It depends on the thickness of your helmet
⚙️ Clamp mount: A clamp mount attaches securely to the helmet edge and fits most open-face helmets. It is stable, easy to install, and can often be removed or transferred when needed.
⚙️ Adhesive mount: An adhesive mount is useful when the helmet shell or edge is too thick for a clamp. It provides a clean look, though it may be less convenient to reposition later.
Check speaker placement flexibility: It decides whether they could fit inside the open-face helmet
Open-face helmets often have less defined ear pockets and more variation in interior padding. For the best comfort and sound quality, choose a headset with slim, adjustable speakers and Velcro spacers that help fine-tune the speaker position near your ears.
What other factors should be considered for an open face helmet headset?
When shopping for an open face helmet headset, it’s important to compare the key features that affect performance, comfort, and convenience while riding. Here are the main things to look for:
🔎 Bluetooth Version: Choose a model with Bluetooth 5.1 or newer whenever possible. Newer versions usually offer faster pairing, more stable connections, lower power consumption, and better compatibility with modern smartphones and GPS devices.
🔎 Battery Life: Check how long the unit can run on a single charge. Many systems provide around 8–10 hours of talk time, while premium models may last even longer. If you often take long rides or tours, extended battery life is especially important.
🔎 Sound Quality: Clear speakers and a quality noise-canceling microphone make a big difference. You should be able to hear music, calls, and navigation prompts clearly, while the microphone helps reduce wind and engine noise during conversations.
🔎 Waterproofing Rating: Weather can change quickly, so choose a headset that is waterproof or at least water-resistant. This helps protect the device from rain, moisture, and dust. For example, Moman Bluetooth helmet headsets like Moman CP-X feature waterproof ratings of IPX5 or higher, protecting against most rain and snow conditions.
🔎 Intercom Function: If you ride with friends or a passenger, review the intercom functions. You can find motorcycle intercom for open face helmet supporting multiple riders, private conversations, group chat, or the ability to listen to music while staying connected.
🔎 Communication Range: Range determines how far you can speak with other riders. Some systems work for over a mile in open conditions, though actual distance may vary depending on terrain, traffic, and obstacles.
🔎 Easy to Use: Controls should be simple to operate while wearing gloves. Large buttons, intuitive layouts, and voice command support can make riding safer and more convenient.
Six steps for installing a headset in open face helmet
Some Bluetooth headset beginners may think installing a Bluetooth headset in helmet is a bit complicated. If you don’t know about the installation either, the guide below can help you.
Step 1 – Get Your Helmet Ready
Proper prep work leads to a clean and secure fit:
Clean the Helmet
Wipe down the inside (speaker areas and pads) and outside. Remove any dirt, sweat, or oils so that adhesives stick well.
Remove Pads and Liners
Gently take off cheek pads, ear pads, or liners to reach the helmet's interior. Most liners snap or Velcro on—just note where everything goes for easy reassembly.
Step 2 – Install the Speakers
Speakers deliver your audio. Good placement means both comfort and sound quality:
🔗 Find or Make Speaker Pockets
Put the speakers in the helmet speaker pockets. If there are no speaker pockets, lightly mark the foam near your ears, then carefully compress or trim it with your fingers or a knife. Don't cut too deep—safety comes first.
🔗 Attach the Speakers
Most Bluetooth headset for open face helmet includes Velcro or adhesive pads. Stick the pads to the back of each speaker and to the matching spots in the helmet.
🔗 Run the Speaker Wires
Route the wires from the speakers to where the Bluetooth module will sit. Tuck the wires under the padding or along the inner edge to keep them neat and out of the way.
Step 3 – Install the Microphone
Attach the boom to the left cheek pad or helmet shell using Velcro or adhesive. Run the mic wire under the padding and use small clips or Velcro strips to stop it from dangling or getting in the way.
Step 4 – Mount the Bluetooth Control Module
⚙️ Pick a Mounting Spot
Most riders put the module on the left side of the helmet so buttons or dials are easy to reach. Just make sure it doesn't interfere with the chin strap or airflow.
⚙️ Choose How to Mount It
Clamp Mount: Insert the clamp's baseplate into the gap between the outer shell and the inner liner. Once it's correctly positioned, use a screwdriver to fasten it securely.
Adhesive Mount: Clean the area well, stick the adhesive pad, and put on the module. Let the adhesive set for 24 hours.
⚙️ Secure the Module
Click or screw the Bluetooth module onto the clamp or adhesive base. Check that it's solid and won't fly off at speed.
Step 5 – Route and Secure All Wires
Since the Open Face helmet does not fully cover the entire head, organizing the device's wires is essential for installing headset in open face helmet.
🔗 Tuck the wires
Run speaker and mic wires under the padding or along the inner rim. Use small adhesive clips or Velcro to hold them in place.
🔗 Put the pads and liners back
Carefully reinstall cheek pads, ear pads, and liners. Make sure no wires get pinched or stretched, and that the helmet still fits snugly and comfortably.
🔗 Check for blocks
Ensure wires don't get in the way of the helmet's fit or safety features like the chin strap or vents.
Step 6 – Test the Bluetooth Headset
Before you ride with the open face helmet headset, make sure everything works:
📐 Charge the module
Spend about two hours fully charging it with the included charging cable.
📐 Pair your devices
Put the headset into pairing mode (holding a button for a few seconds). Connect it with your phone or GPS device. Most headsets can connect to both a phone and a GPS at the same time.
📐 Test audio and mic
Start by playing a song or a podcast to see if the speakers sound crisp and loud enough. Then, call a friend to confirm they can hear you clearly without background interference.
📐 Adjust settings
Use the headset's buttons or companion app to tweak volume, EQ, or intercom preferences.
FAQs about Bluetooth headset for open face helmet
You may still have some questions about open face helmet headsets. Let’s figure them out!
❔ Why choose a Bluetooth headset for an open-face helmet?
Many riders wonder whether a helmet headset is really worth it and what benefits it offers. In reality, it can greatly improve both convenience and safety on the road. Here are some key advantages of using one:
🟢 Hands-free communication: Make calls, use voice assistants, or talk with fellow riders without taking your hands off the handlebars.
🟢 Music and navigation: Listen to your favorite playlists, podcasts, or GPS directions through the helmet speakers.
🟢 Improved safety: Stay connected while keeping your eyes on the road, reducing distractions and making rides safer overall.
❔ Does wind noise affect the quality of phone calls on an open-face helmet?
Since open-face helmets leave the microphone more exposed to airflow, wind noise can sometimes be more noticeable during calls. Selecting a headset with noise-canceling features and a foam windscreen microphone can significantly improve voice clarity.
❔ What's the battery life?
Battery performance varies by model, but lots of open face helmet headsets offer around 10 to 20 hours of talk time or music playback on a single charge. Most Moman helmet headsets offer 28 hours of talk time, very convenient for long-time riding.
